Description
Material:
304 stainless steel and 316 stailess steel is optional.
This IP68 Underwater LED Swimming pool lights used high quality high power led.It is dipped into Silicon glue inside the lens to make it IP Rating IP68.It is easily to be installed.
Color available in Warm White/Cool White/Netural White/Red/Blue/Yellow/Green and RGB.
Stainless steel PAR56 replacement bulb RGB led light ip68 water proof lights for swimming pool parameter:
Item name: PAR56 pool light bulb
Item number: 2027PAR
Material: stainless steel
Wattages: 12W-15W-18W-22W-25W-28W-36W-45W-48W-54W-60W-72W
Voltage: AC12 or DC12V
Chip brand: Epistar, BridgeLux
LED chip: LED chip: high power, SMD 2835, SMD 3030
LED colors: Warm white, Cool white, Red, Greed, Blue, RGB, RGBW
Remote: YES
Viewing angle: 120 degree
Lumen: 100-110lm/W
Waterproof: IP 68 (have to be covered by a niche)
Product size: D117*H96.5MM
Cable: 2*1.5mm²*1.5m
Box: white box, color box, customized box
Outer box size: 54*36*36cm
Quantity per box: 12pcs
Warranty: 2 years
Par56 Submersible Underwater RGB Light Boat Swiming Pool Led Lights Feature:
Par56 swimming pool LED bulb is designed for replacing old Hologen Par 56 Bulb,Here is some Feature how LED Par56 bulb is better than old Hologen bulb:
1.It is best repalcement for Hologen Par 56 Bulb for the present, Its size is perfect match your old pool housing/niche, you don’t have to change old niche, power cable or transformer, this LED Par 56 bulb will fix your niche faultless.
2.Energy Savings: A conventional 300 watt light will cost use up to $260 of electricity in one year. The equivalent LED unit will use $30. When this saving is considered along with the frequent replacement of conventional underwater lights, then pay back periods may well be under 12 months.
3.Our Par56 LED bulb can work with AC12V or DC12V .
4.It is 12 volt body safety voltage input and color changing RGB also available.
5.Our lamp is IP 68 waterproof (have to be covered by a niche)
6. One remote can control 30 lamps at same time at a sufficient distance. More lights or bigger distance pleas
Important Notes.
1.Do not connect AC110V, AC230V, or any voltage more than 12V to our lamp. 2. Do not let the lamp CONTINUOUSLY on more than 30 minutes WITHOUT WATER, if not, it will be easier hot and get burned. 3. Do not drill screws TOO TIGHT when fixing our lamp to niche.
2.LED chip will release large heat when it is working,while it was installed into a niche,especially need water cover it to dissipate heat,so we recommend you don’t leave the lamp without water cover more than 30 minutes,it will easily cause the lamp get burned.
